For specifications and pricing, please click on the buy now:
At present we manufacture thermoelectric power modules constructed with Aluminum flame sprayed hot side contacts. Listed TEG power modules can operate at temperatures of 320°C (608°F) and are the highest temperature Thermoelectric Power Modules available with limited exposure to higher temperatures without degradation. In stock TEG modules are lapped, (same thickness). Enabling multiple power modules to be applied to the same surface resulting in the same contact force when the plates are compressed for excellent assembly results and TEG power generation results.
All of our Thermoelectric Power Generation Modules come with hot side ceramic plate already attached as a floating plate. Affixed with high temperature RTV silicone seal and free floating to reduce the stress imposed by the Delta Temperature (DT) across each TEG module!
Custom cold side slitting ideal technique for the multi-temperature cycling and reduced stress on the module couples.
AIN ( Aluminum Nitride) ceramic hot side plates, is available with volume purchases.
Part Number Specification
The following specification are based on temperature of
Hot side 300°C (572°F) cold side 30°C (86°F).
TEG1-12610-5.1 , TEG1-12611-6.0, TEG1-12611-8.0 are stock***** high temperature Thermoelectric Power Modules.
****** NO MINIMUMS on Stock Thermoelectric Generation modules *****
Thermoelectric (TEG) Power modules selection Design Specifically for SEEBECK EFFECT USE.
ALUMINUM FLAME SPRAYED HOT SIDE CONTACTS FOR HIGH TEMPERATURES UP TO 320°C (608°F) HOT SIDE INTERMITTENT TO 330°C (626°)
Peripherals Parts for our TEG power modules to optimize the SEEBECK EFFECT.